hotwaterhighpressurepage

Special High Pressure Washers to suit India Voltage Conditions.Single Piece,chemically treated and coated strong plastic Body & classis. Machines have accessories storage compartment with operating instructions. Hose pivots on the gun thus avoids turns& kinks.

KARCHER machine have integrated fuels and detergents tank with filing facility, from outside. Heavy-duty electric motor with all safety features. The machines have integrated pressure & Water flow control variable to suit all jobs.Excellents cooling systems through fans for fuels pump. Karcher machines have exclusive feature for the protection of the operator. The piston pump is quite in operation and has long life. Karcher patented water-cooled motors.Patented Servo press trigger gum to control pressure & water flow. sss

Accurate suction of detergent is possible through variable metering values. Compact, vertical burner for permanent ignition and to avoid corrosion due to condensation. Accurate temperature selection due to varible regulator.Overheating and dry operation protection is key safety feature.Information Control Panel and operating data registration on machine thus ebsuring timely instrction for service by machine itself.Karcher patented power nozzle for excellent cleaning results.Machine in india are provided with the pre-filters as a std. Accessories.

HDS 450 Ci

Standard Equipment

10m High-pressure hose, 450 mm Long trigger gun, 550 mm Spray lance, Two-way nozzle, 25°HP/40°LP nozzle.

Technical Data

Water flow rate : 500 l/h
Operating pressure : 100 bar
Max. temp. feed 12°C : 80 °C
Servopress : no
Power nozzle : no
Consumpt. light fuel oil EL –t=45°C : 2,7 kg/h
Connected load : 2,2 kW
Tank capacity fuel : 15 l
Tank capacity detergent : no
Weight : 84 kg
Dimensions lenght x width x height : 935 x 600 x 730 mm

Product Description

The main benefits of this compact hot water high-pressure cleaner are its low weight, compact dimensions and the ease with which it can be loaded and transported. It fits easily in a station wagon for transportation between different locations.
Thanks to its compact size, the unit takes up a minimum of storage space when it is not in use. Big wheels and a caster as well as ergonomically shaped push/pull handles ensure excellent manoeuvrability and mobility, even on difficult surfaces. The three-piston high-pressure pump has hardened stainless steel pistons and aluminium cylinder head. A pressure switch shuts down the unit automatically when the trigger gun is closed to avoid the problems of running in the closed circuit mode. High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the unit exceptionally reliable. The characteristics of the time-proven Kärcher boiler design are high performance in a minimum of space while ensuring full compliance with the statutory emission limits. A deep-drawn chassis and a hinged plastic machine cover make the unit weather-proof and protect it from impact damage.
Technical Description: -Single-phase unit with air-cooled two-pole electric motor.
-Three-piston axial pump with stainless-steel pistons.
-Chemical can be added in low-pressure mode.

Applications

Cleaning vehicles and workshop in small industrial businesses. For painters who occasionally do facade cleaning. General cleaning tasks in small industrial businesses.

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
High-pressure pump
· Aluminium cylinder head with injector for detergent intake.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
38kW / 32680 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control.
® Automatic switch-off when gun is closed, superior service life of pump. Miscellaneous
· Hinged hood made of high-impact plastic.
® Protection from dirt, water and damage.

Go to top Back

HDS 501 C

Standard Equipment

• High-Pressure hose (10m)
• AVS
• Spray lance (550mm)
• Two-way nozzle
• Extended trigger gun

Technical Data

Power supply : 230 V / 1~ / 50 Hz
Water flow rate : 500 l/h
pump pressure : 120 bar
Max. temp. feed 12°C : 80 °C
Consumpt. light fuel oil EL t=45°C : 2,7 kg/h
Connected load : 2,5 kW
Fuel tank : 16 l
Detergent tank : 8 l
Weight : 84 kg
Dimensions length x width x height : 940 x 600 x 740 mm

Go to top Back

HDS 550 C

Standard Equipment

• High-Pressure hose (10m)
• AVS
• Spray lance (550mm)
• Two-way nozzle
• Extended trigger gun

Technical Data

Power supply : 1~ 230 V 50 Hz
Water flow rate : 500 l/h
pump pressure : 120 bar
Max. temp. feed 12°C : 80 °C
Consumpt. light fuel oil EL t=45°C : 2,7 kg/h
Connected load : 2,5 kW
Fuel tank : 16 l
Detergent tank : 8 l
Weight : 84 kg
Dimensions length x width x height : 940 x 600 x 740 mm

Product Description

The main benefits of the compact class of hot water high-pressure cleaners are their low weight, compact dimensions and the ease with which they can be loaded and transported. They fit easily in a station wagon for transportation from one location to the next. Thanks to their compact size, these units take up a minimum of storage space when they are not in use. Large diameter wheels and a castor as well as ergonomically shaped push/pull handles ensure excellent manoeuvrability and mobility, even on difficult surfaces. The three-piston axial high-pressure pump has hardened stainless-steel pistons and a brass cylinder head. A pressure switch shuts down the unit automatically when the trigger gun is closed. This relieves the load on components and prolongs their service lives. High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the units exceptionally reliable. The characteristics of the time-proven Kärcher boiler design are high performance in a minimum of space while ensuring full compliance with the statutory emission limits. A chassis made of high-grade plastics and a hinged plastic machine cover protect the units from damage and the weather. User convenience is increased by the central switch as well as the holders for the hose, spray lance and small accessories.

Technical Description:
Single-phase unit with air-cooled two-pole electric motor. Three-piston axial pump with hardened stainless-steel pistons. Chemical feed in low-pressure mode.

Applications

· Cleaning vehicles and workshops in small companies. For painters and
decorators with occasional facade cleaning work. General cleaning tasks in
the crafts and trades.

Go to top Back

HDS 558 C

Standard Equipment

10 m High-pressure hose, Servopress trigger gun with soft grip, Pivoting 1050 mm spray lance, Kärcher 25° Power nozzle.

Technical Data

Water flow rate : 290-550 l/h
Operating pressure : 30-140 bar
Max. temp. feed 12°C : 140/80 °C
Servopress : yes
Power nozzle : yes
Consumpt. light fuel oil EL –t=45°C : 3,0 kg/h
Connected load : 3,2 kW
Tank capacity fuel : 16 l
Tank capacity detergent : 8 l
Weight : 94 kg
Dimensions lenght x width x height : 940 x 600 x 740 mm

Product Description

The main benefits of this compact hot water high-pressure cleaner are its low weight, compact dimensions and the ease with which it can be loaded and transported. It fits easily in a station wagon for transportation between different locations.. Thanks to its compact size, the unit takes up a minimum of storage space when it is not in use. Big wheels and a caster as well as ergonomically shaped push/pull handles ensure excellent manoeuvrability and mobility, even on difficult surfaces. The three-piston high-pressure pump has hardened stainless-steel pistons and a brass cylinder head. The unit is monitored by two pressure switches via the pressure gun to avoid the negative effects of running in the closed-circuit mode. High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the unit exceptionally reliable. The characteristics of the time-proven Kärcher boiler design are high performance in a minimum of space while ensuring full compliance with the statutory emission limits. A deep-drawn chassis and a hinged plastic machine cover make the unit weather-proof and protect it from impact damage.
Technical Description: -Single-phase unit with air-cooled two-pole electric motor.
-Three-piston axial pump with stainless-steel pistons.
-Chemical can be added in the high-pressure mode.

Applications

Cleaning vehicles and workshop in small industrial businesses. For painters who occasionally do facade cleaning. General cleaning tasks in small industrial businesses.

Features and Benefits

Drive
· Direct drive of high-pressure pump, fan and fuel pump by one motor shaft.
® Compact construction, maximum use of performance, less prone to fault.
High-pressure pump
· Brass cylinder head with injector for detergent.
® Long service life, detergent application in the high pressure mode.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and
quiet operation.
Boiler and burner system
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
38kW / 32680 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control.
® Automatic switch-off when gun is closed, superior service life of pump.
® Pressure and water flow rate can be adjusted directly at the trigger gun
(Servopress facility)
Miscellaneous
· Hinged, lockable hood made of impact resistant plastic.
® Protection from dirt, water and damage.

Go to top Back

HDS 655

Standard Equipment

10 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm spray lance, Kärcher 25° power nozzle.

Technical Data

Water flow rate : 400-700 l/h
Operating pressure : 30-110 bar
Max. temp. feed 12°C : 140/80 °C
Servopress : yes
Power nozzle : yes
Consumpt. light fuel oil EL Dt=45°C : 4,3 kg/h
Connected load : 3,2 kW
Tank capacity fuel : 25 l
Tank capacity detergent : 20 l
Weight : 130 kg
Dimensions lenght x width x height : 1285 x 690 x 835 mm

Product Description

This medium-duty hot water high-pressure cleaner offers a high level of operator comfort and service-friendliness. Pressure, water flow rate and temperature can be adjusted directly on the trigger gun.
This enables the operator to immediately change settings to suit different surfaces and degrees of soiling. The tanks for heating oil, detergent and scale inhibitor can be filled from outside without having to open the machine cover. The machine cover is lockable. A compartment is provided for storing nozzles, tools and other small parts so that they are always at hand. Electronic service control system shows user when maintenance is due and provides assistance on display in the event of problems. This simplifies repair work and minimizes down times. The upright boiler with integral high-performance burner ensures excellent heat exchange which is one of the prerequisites for complying with emission regulations. The boiler's special design avoids dew point corrosion. The outstanding features of the smooth-running three-piston axial pump with its chemical resistant brass cylinder head are its simple construction, compactness and long service life. The high-pressure pump, burner fan and heating oil pump are driven directly by the electric motor. This layout reduces overall size and guarantees high efficiency and reliability.

Technical Description:
-Single-phase unit with 4-pole electric motor.
-Steam mode up to 140°C.
-Three-piston axial pump with steel pistons.
-Chemical tank.
-Infinitely variable pressure and water flow control
on trigger gun.
-Electronic service control system.

Applications

As a single-phase unit, the HDS 755 is particularly suitable for use in changing locations where a three-phase power supply is not always available. Main users are painters and contract cleaners (for cleaning facades). It is also a favourite on construction sites because of its excellent operator comfort.

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
· Water cooling of electric motor (patent no. DE 300 1751).
® Optimum power, pre-heated water.
· Enduranced tested single-phase 4 pole-motor with double safety circuit (Bi-metal
protection).
® Strong drive with double overload protection, automatic cutout of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
55kW / 47300 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control, switch-off point adapted to operating pressure.
® Machine stops at pre-selected operating pressure when gun is closed, relieves high
pressure system and motor.
Miscellaneous
· "Servopress-Variotemp" optional.
® Still more convenient cleaning, pressure, water flow and temperature adjusted at the
gun.
· Scale inhibitor (DGT) with level indicator.
® Prevents scale deposits.

Go to top Back

HDS 695 S

Standard Equipment

10 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm lance, Kärcher 25° Power nozzle, Pole reversing plug.

Technical Data

Water flow rate : 400-800 l/h
Operating pressure : 30-150 bar
Max. temp. feed 12°C : 140/80 °C
Servopress/Variotemp : yes
Service Control : no
Power nozzle : yes
Consumpt. light fuel oil EL Dt=45°C : 4,3 kg/h
Connected load : 6,4 kW
Tank capacity fuel : 25 l
Tank capacity detergent : 20 l
Weight : 117 kg
Dimensions lenght x width x height : 1285 x 690 x 835 mm

Product Description

This medium-duty hot water high-pressure cleaner offers a high level of operator comfort and service-friendliness. The tanks for heating oil, detergent and scale inhibitor can be filled from outside without having to open the machine cover. The machine cover is lockable. A compartment is provided for storing nozzles, tools and other small parts so that they are always at hand. The upright boiler with integral high-performance burner ensures excellent heat exchange which is one of the prerequisites for complying with emission regulations. The boiler's special design avoids dew point corrosion. The outstanding features of the smooth-running three-piston axial pump with its chemical resistant brass cylinder head are its simple construction, compactness and long service life. The high-pressure pump, burner fan and heating oil pump are driven directly by the electric motor. This layout reduces overall size and guarantees high efficiency and reliability.
Technical Description:
-Three-phase unit with 4-pole electric motor.
-Steam mode up to 140°C.
-Three-piston axial pump with steel pistons and
ceramic sleeves.
-Chemical tank.
-Infinitely variable pressure and water flow control
on trigger gun.

Applications

Primarily medium-sized automotive workshops and dealers for vehicle, chassis and engine washing as well as prewash at entrance to conveyor car washes. General cleaning tasks in industry, local governments and agriculture.

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
· Water cooling of electric motor (patent no. DE 300 1751).
® Optimum power, pre-heated water.
· Enduranced tested single-phase 4 pole-motor with double safety circuit (Bi-metal
protection).
® Strong drive with double overload protection, automatic cutout of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
60kW / 52000 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control, switch-off point adapted to operating pressure.
® Machine stops at pre-selected operating pressure when gun is closed, relieves high
pressure system and motor.
Miscellaneous
· Servopress
® Still more convenient cleaning, pressure, water flow and temperature adjusted at the
gun.
· Scale inhibitor (DGT) with level indicator.
® Prevents scale deposits.
· Pole reversing plug for quickly changing direction of rotation when using different
power outlets

Go to top Back

HDS 698 C

Standard Equipment

10 m High-pressure hose, Servopress trigger gun with soft grip, Pivoting 1050 mm lance, Kärcher 25° Power nozzle.

Technical Data

Water flow rate : 300-650 l/h
Operating pressure : 30-160 bar
Max. temp. feed 12°C : 140/80 °C
Servopress/Variotemp : yes
Service Control : no
Power nozzle : yes
Consumpt. light fuel oil EL –t=45°C : 3,7 kg/h
Connected load : 4,5 kW
Tank capacity fuel : 16 l
Tank capacity detergent : 8 l
Weight : 94 kg
Dimensions lenght x width x height : 940 x 600 x 740 mm

Product Description

The main benefits of this compact hot water high-pressure cleaner are its low weight, compact dimensions and the ease with which it can be loaded and transported. It fits easily in a station wagon for transportation between different locations.. Thanks to its compact size, the unit takes up a minimum of storage space when it is not in use. Big wheels and a caster as well as ergonomically shaped push/pull handles ensure excellent manoeuvrability and mobility, even on difficult surfaces. The three-piston high-pressure pump has hardened stainless-steel pistons and a brass cylinder head. The unit is monitored by two pressure switches via the pressure gun to avoid the negative effects of running in the closed-circuit mode. High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the unit exceptionally reliable. The characteristics of the time-proven Kärcher boiler design are high performance in a minimum of space while ensuring full compliance with the statutory emission limits. A deep-drawn chassis and a hinged plastic machine cover make the unit weather-proof and protect it from impact damage.
Technical Description: -Three-phase unit with air-cooled two-pole electric motor.
-Three-piston axial pump with stainless-steel sspistons.
-Chemical can be added in the high-pressure mode.

Applications

Vehicle and workshop cleaning in trage operations. General cleaning jobs in the trades and in the industry.

Features and Benefits

Drive
· Direct drive of high-pressure pump, fan and fuel pump by one motor shaft.
® Compact construction, maximum use of performance, less prone to fault.
High-pressure pump
· Brass cylinder head with injector for detergent.
® Long service life, detergent application in the high pressure mode.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burner system
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
38kW / 32680 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control.
® Automatic switch-off when gun is closed, superior service life of pump.
® Pressure and water flow rate can be adjusted directly at the trigger gun (Servopress
facility)
Miscellaneous
· Hinged, lockable hood made of impact resistant plastic.
® Protection from dirt, water and damage.

Go to top Back

HDS 798 C

Standard Equipment

• High-Pressure hose (10m)
• AVS
• Privoting spray lance
• Power nozzle
• Soft gripgun
• Servopress
• Pole changing plug

Technical Data

Power supply : 3~ 400 V 50 Hz
Water flow rate : 350-750 l/h
pump pressure : 30-180 bar
Max. temp. feed 12°C : 140/80 °C
Consumpt. light fuel oil EL t=45°C : 4,2 kg/h
Connected load : 5,6 W
Fuel tank : 16 l
Detergent tank : 8 l
Weight : 94 kg
Dimensions length x width x height : 940 x 600 x 740 mm

Product Description

The three-piston high-pressure pump has hardened stainless-steel pistons and a brass cylinder head. The unit is monitored by two pressure switches via the pressure gun to avoid the negative effects of running in the closed-circuit mode.

High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the unit exceptionally reliable.

The characteristics of the time-proven Kärcher boiler design are high performance in a minimum of space while ensuring full compliance with the statutory emission limits.

A deep-drawn chassis and a hinged plastic machine cover make the unit weather-proof and protect it from impact damage.

Technical Description:

-Three-phase unit with air-cooled two-pole electric motor.
-Three-piston axial pump with stainless-steel pistons.
-Chemical can be added in the high-pressure mode.

Applications

· Vehicle and workshop cleaning in trage operations. General cleaning jobs in
the trades and in the industry.

Features and Benefits

· High-tech plastic chassis (hot plate welded) with integrated *15 l fuel oil tank*
8 l detergent tank* float tank
• Multifunctional chassis, corrosion-proof, shock-proof, tanks included
· Integrated hose and accessory storage, chassis is prepared to take a hose reel
• Neat hose storage, elegant and kompact design
· Upper and lower part of the chassis are manufactured from 3 layer sandwich
plastic (patent pending)
• Robust and noise absorbing due to relativley big sides at low weight
· Hood with spray lance support and opening for oil level control
• Safe fixation of the spray lance, convenient control of the oil level
· One-switch-control for on/off, hot and cold water operation and
temperature adjustment
• Very comfortable operation
· Big wheels, 1 castor, 2 ergonomic push handles , 4 handle grips incorporated in
the chassis
• Easy to move and to carry
· Air-cooled 2-pole single phase motor (2800 1/min), thermal protection
• Robust, powerful, endurance tested
· Direct drive of high pressure pump, fan and fuel oil pump from one shaft
• Compact design, less proneness to fault, high efficiency
· Three piston pump (axial), high-grade hardened stainless steel pistons,
swash-plate drive
• Direct-drive, minimum of moving parts, outstanding efficiency and lifetime
· Brass cylinder head with inlet and outlet valves from high-grade steel and
safety valve
• High-grade materials, long lifetime, pump is protected from overload
· Detergent supply via the cylinder head, detergent metering valve at the tank cap
• Application by high pressure, precise dosage of the detergent
· Variable pressure and water flow control
• Adjustment to all cleaning jobs, steam stage
· Pressure gauge visible from above
• Convenient control of working pressure
· Pressure switch control with 2 pressure switches, switch off point is adapted
to operating pressure
• Reduced noise emissions, economic and enviromental friendly, high pump life
time, Servopress as an option
· Washable filter at water inlet
• Pump protection against dirty water
· High performance burner with permanent ignition, vertical heating coil
• Even heat distribution, no corrosion due to condensation, emission values are
lower than the standards, no risk of explosions
· Low water cut-out
• Burner is automatically switched off when water supply is low, protection
against overheating
· Low fuel protection with indicator
• Automatic switch-off of burner, protects from ceasing of fuel pump
· Temperature control with temperature probe
• Thermostatic controled temperature adjustment up to 140 °C
· Float tank according to EN 1717
• Separation of fresh water supply
· Scale inhibitor with level indicator
• Protection of all water carrying parts (e.g. heater coil) against scale deposits
· Practical compartment for accessories/nozzles
• Keeps change-over nozzle and dirt blaster tidy in place and ready to use

Go to top Back

HDS 801 B

Standard Equipment

10 m High-pressure hose, 450 mm Long trigger gun, 550 mm Spray lance, Triple nozzle 0°/25°/40°.

Technical Data

Water flow rate : 650 l/h
Operating pressure : 150 bar
Max. water feed temp. : 60 °C
AVS : yes
Servopress : no
Electric starter : no
Engine : 4,0 / 5,5 kW/PS
Make : Honda
Weight : 34,0 kg
Dimensions lenght x width x height : 1044 x 542 x 662 mm

Product Description

Compact, horizontal petrol-powered cold water high-pressure cleaner for go-anywhere applications independent of an electricity supply. The neat engine-pump assembly is mounted in a rugged, mobile tubular steel frame. The unit's compact dimensions ensure trouble-free transportation between sites. Its single cylinder four-stroke air-cooled engine is easily started with the pull starter. The pump's brass cylinder head and stainless-steel valves are designed for tough professional applications and ensure a long service life. Infinitely variable control of pressure and water flow enables jet to be ideally matched to different cleaning tasks. Similarly, infinitely variable detergent metering ensures exactly the right concentration for the job and therefore helps reduce chemical consumption. A built-in safety valve reliably protects the unit against excessively high pressures. The thermal sensor on the pump's cylinder head shuts down the engine automatically if the temperature exceeds a certain limit during closed circuit operation (with the trigger gun closed). Accessory holders on the handles and frame keep everything tidily stowed and ready for instant use. Pneumatic wheels ensure easy handling and manoeuvrability, even in difficult terrain.

Applications

Robust, mobile high-pressure cleaner for the trades and service providers. Ideal petrol-powered unit with go-anywhere capability for allround applications.

Features and Benefit

Drive
· Air cooled 5.5HP four-stroke petrol engine (Honda), pull start.
® Easy start, high performance, self-sufficient mobility.
High-pressure pump
· Brass cylinder head with suction and pressure valves from high-grade steel.
® Long service life, allows use of a wide range of detergents.
Miscellaneous
· Large wheels with tyres.
® Convenient manoeuvrabilitiy on rough ground.
· AVS anti-twist system.
® Preventing annoying twists and loops in the hose.

Go to top Back

HDS 895 S

Standard Equipment

10 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm lance, Kärcher 25° Power nozzle, Pole reversing plug.

Technical Data

Water flow rate : 470-1000 l/h
Operating pressure : 30-180 bar
Max. temp. feed 12°C : 140/80 °C
Servopress/Variotemp : yes
Service Control : no
Power nozzle : yes
Consumpt. light fuel oil EL Dt=45°C : 5,6 kg/h
Connected load : 6,7 kW
Tank capacity fuel : 25 l
Tank capacity detergent : 20 l
Weight : 133 kg
Dimensions lenght x width x height : 1285 x 690 x 835 mm

Product Description

Technical Description:
-Three-phase unit with 4-pole electric motor.
-Steam mode up to 140°C.
-Three-piston axial pump with steel pistons and
ceramic sleeves.
-Chemical tank.
-Infinitely variable pressure and water flow control
on trigger gun.

Applications

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
· Water cooling of electric motor (patent no. DE 300 1751).
® Optimum power, pre-heated water.
· Enduranced tested single-phase 4 pole-motor with double safety circuit (Bi-metal
protection).
® Strong drive with double overload protection, automatic cutout of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
63kW / 54180 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control, switch-off point adapted to operating pressure.
® Machine stops at pre-selected operating pressure when gun is closed, relieves high
pressure system and motor.
Miscellaneous
· Servopress
® Still more convenient cleaning, pressure, water flow and temperature adjusted at the
gun.
· Scale inhibitor (DGT) with level indicator.
® Prevents scale deposits.
· Pole reversing plug for quickly changing direction of rotation when using different
power outlets

Go to top Back

HDS 1195

Standard Equipment

10 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm lance, Kärcher 25° Power nozzle, Pole reversing plug.

Technical Data

Water flow rate : 600-1200 l/h
Operating pressure : 30-180 bar
Max. temp. feed 12°C : 140/80 °C
Servopress/Variotemp : yes
Service Control : no
Power nozzle : yes
Consumpt. light fuel oil EL Dt=45°C : 6,5 kg/h
Connected load : 8,2 kW
Tank capacity fuel : 25 l
Tank capacity detergent : 1x20 + 1x17 l
Weight : 155 kg
Dimensions lenght x width x height : 1298 x 690 x 835 mm

Product Description

Technical Description:
-Three-phase unit with 4-pole electric motor.
-Steam mode up to 140°C.
-Three-piston axial pump, ceramic pistons.
-Two chemical tanks.

Applications

High water flow rate makes this unit particularly suitable for cleaning large objects, e.g. trucks, construction machinery, buses. Two chemical tanks for cleaning and care operations. For general outdoor cleaning tasks in municipalities.

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
· Water cooling of electric motor (patent no. DE 300 1751).
® Optimum power, pre-heated water.
· Enduranced tested single-phase 4 pole-motor with double safety circuit (Bi-metal
protection).
® Strong drive with double overload protection, automatic cutout of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
63kW / 54180 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
Safety and control equipment
· Pressure switch control, switch-off point adapted to operating pressure.
® Machine stops at pre-selected operating pressure when gun is closed, relieves high
pressure system and motor.
· Low water cut-out.
® Automatic switch-off of burner when water supply is low, protects against over
heating.
Miscellaneous
· "Servopress-Variotemp" optional.
® Still more convenient cleaning, pressure, water flow and temperature adjusted at the
gun.
· Scale inhibitor (DGT) with level indicator.
® Prevents scale deposits.

Go to top Back

HDS 1295

Standard Equipment

10 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm spray lance, Kärcher 25° Power nozzle, Pole reversing plug.

Technical Data

Water flow rate : 600-1200 l/h
Operating pressure : 30-180 bar
Max. temp. feed 12°C : 140/80 °C
Servopress/Variotemp : yes
Service Control : yes
Power nozzle : yes
Consumpt. light fuel oil EL Dt=45°C : 6,5 kg/h
Connected load : 8,2 kW
Tank capacity fuel : 25 l
Tank capacity detergent : 1x20 + 1x17 l
Weight : 155 kg
Dimensions lenght x width x height : 1298 x 690 x 835 mm

Product Description

Technical Description:
-Three-phase unit with 4-pole electric motor.
-Steam mode up to 140°C.
-Three-piston axial pump, ceramic pistons.
-Chemical tank.
-Infinitely variable pressure and water flow control
on trigger gun.
-Electronic service control system.
-Two chemical tanks with electronic level
monitor.

Applications

Features and Benefit

Drive
· Direct drive form one motor shaft of high-pressure pump, fan for the combustion air
and the fuel pump.
® Compact construction, maximum use of performance, less prone to fault.
· Water cooling of electric motor (patent no. DE 300 1751).
® Optimum power, pre-heated water.
· Enduranced tested single-phase 4 pole-motor with double safety circuit (Bi-metal
protection).
® Strong drive with double overload protection, automatic cutout of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Three piston pump (axial), high-grade steel pistons hardended, swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet
operation.
Boiler and burnersystem
· Compact burner, vertical heating coil and permanent ignition, heating capacity:
63kW / 54180 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
significantly lower than the statutory values.
· "Emission control" by flue gas monitor.
® Effective use of fuel, maximum flue gas values.
Safety and control equipment
· Pressure switch control, switch-off point adapted to operating pressure.
® Machine stops at pre-selected operating pressure when gun is closed, relieves high
pressure system and motor.
· "Service-Control", electronic monitoring.
® Protection from malfunction and for recording operation data by LED indicating
maintenance intervals as well as any malfunctions which can be rectified by the user. Miscellaneous
· "Servopress-Variotemp" optional.
® Still more convenient cleaning, pressure, water flow and temperature adjusted at the
gun.
· Scale inhibitor (DGT) with level indicator.
® Prevents scale deposits.

Go to top Back

HDS 2000 SUPER

Standard Equipment

10 m High-pressure hose, 450 mm Long trigger gun, 550 mm Spray lance, Triple nozzle 0°/25°/40°.

Technical Data

Product Description

Applications

Robust, mobile high-pressure cleaner for the trades and service providers. Ideal petrol-powered unit with go-anywhere capability for allround applications.

Features and Benefit

Drive
· Air cooled 5.5HP four-stroke petrol engine (Honda), pull start.
® Easy start, high performance, self-sufficient mobility.
High-pressure pump
· Brass cylinder head with suction and pressure valves from high-grade steel.
® Long service life, allows use of a wide range of detergents.
Miscellaneous
· Large wheels with tyres.
® Convenient manoeuvrabilitiy on rough ground.
· AVS anti-twist system.
® Preventing annoying twists and loops in the hose.

Go to top Back

HDS 108 D

Standard Equipment

10 m High-pressure hose, Trigger gun with extension, 550 mm Spray lance, Triple nozzle 0°/25°/40°.

Technical Data

Water flow rate : 600 l/h
Operating pressure : 140 bar
Max. temp. feed 12°C : 80 °C
AVS : yes
Servopress : no
Electric starter : no
Consumpt. light fuel oil EL -t= 50°C : 3,7 kg/h
Engine : 3.5 / 4.8 kW/PS
Make : Lombardi
Tank capacity fuel : 21 l
Weight : 110,0 kg
Dimensions lenght x width x height : 1168 x 862 x 767 mm

Product Description

Rugged and versatile petrol-powered cold water high-pressure cleaner which operates independent of an electricity supply. Four-stroke air-cooled petrol engine with pull starter.Engine and pump are installed on anti-vibration mounts in a sturdy, easily transported tubular steel frame for reliable protection against damage. Frame is powder coated to protect it against corrosion and has accessory holders to accommodate the standard accessories. Large diameter, pneumatic wheels ensure convenient mobility, even in difficult terrain. Durable, fully enclosed three-piston axial pump with swashplate drive ensures outstanding efficiency and an extra long wear life. The pump's brass cylinder head and stainless-steel valves are designed for tough professional applications. Safety equipment: Safety valve reliably protects the unit against excessively high pressures.
Low oil cut-out which shuts off engine automatically in the event of a low oil level.
Relief valve with integral pressure and water flow control to suit different cleaning tasks.
The thermal sensor on the pump's cylinder head shuts down the engine automatically if the temperature exceeds a certain limit when the trigger gun closed. Infinitely variable detergent metering valve ensures precise and economic detergent feed in low pressure mode. It is set by rotating the triple nozzle, which has two additional jets, i.e. a high-pressure pencil jet and a high-pressure 25° fan jet.

Applications

High-pressure cleaner for full-force professional cleaning operations. Outstanding convenience features, high safety standards. Mobile unit which operates independent of electricity. Ideal for painters, plasterers, facade cleaners, building contractors, farmers, the forestry industry and local governments.

Features and Benefit

Drive
· Air-cooled 4.8HP (DIN) four-stroke diesel engine (lombardi), electric start.
® Robust, high-performance, self-sufficient mobility.
High-pressure pump
· Brass cylinder head with suction and pressure valves of stainless stell.
® Long service life, resistant to a wide range of detergents .
Boiler and burnersystem
· High-performance burner, vertical heating coil and permanent ignition, heating capacity: 71kW / 61000 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are controlled and significantly lower than the statutory values.
Safety and control equipment
· Low water cut out.
® Automatic switch-off of burner when water supply is low, protects against over heating.
· Low oil cut out.
® Automatic stop of engine at low lubricant level, stops engine ceasing.
Miscellaneous
· Sturdy frame from tubular steel, powder coated, two air-feeled wheels.
® Overall protection to avoid damage under tough use, easy loading by fork lift truck or crane corrosion resistant.

Go to top Back

HDS 1000 BE

Standard Equipment

15 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm spray lance, 25° power nozzle.

Technical Data

Water flow rate : 450-900 l/h
Operating pressure : 40-210 bar
Max. temp. feed 12°C : 140/80 °C
AVS : yes
Servopress : yes
Electric starter : yes
Consumpt. light fuel oil EL -t= 50°C : 5,6 kg/h
Engine : 9,75 / 13,0 kW/PS
Make : Honda
Tank capacity fuel : 30 l
Weight : 165,0 kg
Dimensions lenght x width x height : 1130 x 750 x 855 mm

Product Description

Powerful, hot water high-pressure cleaner with robust four-stroke petrol engine and electric starter for operation independent of an electricity supply. All components are accommodated in a sturdy tubular steel frame which provides all-round protection during heavy-duty applications.

The frame is specially designed for mechanical handling with a crane or fork-lift truck. The engine is equipped with an automatic speed reducing facility which lowers the noise level during work breaks and greatly extends the service life of the high-pressure cleaner. The standard electric starter enhances starting comfort. High-grade materials in the high-pressure pump, i.e. brass cylinder head, stainless steel valves, nickel-chromium plated stainless-steel pistons, help guarantee a long service life and superior running characteristics. A pressure relief valve, integral pressure and water flow controls as well as the steam mode ensure that performance can be ideally matched to different cleaning tasks. The high-performance burner, with upright heater coil and non-detonating continuous ignition, has an infinitely variable setting between 30° and 140°C.
Safety features, such as the low oil cut-out, safety valves, low water cut-out and low heating oil cut-out help protect the machine in tough day-to-day operating conditions. The float tank with its integrated drip-feed scale inhibitor (DGT) reliably isolates the unit from the drinking water main and protects all components that come into contact with water from scale and other deposits. The Servopress system permits infinitely variable control of pressure and water flow directly on the trigger gun. The standard Kärcher Power nozzle delivers outstanding cleaning power for exceptional economy and efficiency. The built-in 30-litre heating oil tank is easily filled and permits long periods of uninterrupted operation. If required, exact quantities of detergent can be added to the high-pressure jet via the infinitely variable detergent metering valve.

Applications

Designed for professionals who need optimum cleaning power in all those areas where there is no convenient electricity supply.
Plant hire businesses, construction companies, farms and forestry services as well as local governments put their trust in this specialist for mobile applications.

Features and Benefit

Drive
· Air-cooled 13HP (DIN) four-stroke petrol engine (Honda), electric start.
® Easy to start, robust, high-performance, self-sufficient mobility.
· Automatic reduction of engine speed when gun is closed.
® Reduced noise level and fuel consumption, increased life time.
High-pressure pump
· Brass cylinder head with suction and pressure valves of stainless stell.
® Long service life, resistant to a wide range of detergents .
Boiler and burnersystem
· High-performance burner, vertical heating coil and permanent ignition, heating
capacity: 71kW / 61000 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are
controlled and significantly lower than the statutory values.
Safety and control equipment
· Low water cut out.
® Automatic switch-off of burner when water supply is low, protects against over heating.
Miscellaneous
· Sturdy frame from tubular steel, powder coated.
® Overall protection to avoid damage under tough use, easy loading by fork lift truck or
crane corrosion resistant.

Go to top Back

HDS 1000 DE

Standard Equipment

15 m high-pressure hose, Servopress trigger gun with soft grip, pivoting 1050 mm spray lance, 25° power nozzle.

Technical Data

Water flow rate : 450-900 l/h
Operating pressure : 40-200 bar
Max. temp. feed 12°C : 140/80 °C
AVS : yes
Servopress : yes
Electric starter : yes
Consumpt. light fuel oil EL -t= 50°C : 5,6 kg/h
Engine : 6,6 / 9,0 kW/PS
Make : Yanmar
Tank capacity fuel : 30 l
Weight : 185,0 kg
Dimensions lenght x width x height : 1130 x 750 x 855 mm

Product Description

Powerful, hot water high-pressure cleaner with robust four-stroke diesel engine and electric starter for operation independent of an electricity supply. All components are accommodated in a sturdy tubular steel frame which provides all-round protection during heavy-duty applications.

The frame is specially designed for mechanical handling with a crane or fork-lift truck. The engine is equipped with an automatic speed reducing facility which lowers the noise level during work breaks and greatly extends the service life of the high-pressure cleaner. The standard electric starter enhances starting comfort. High-grade materials in the high-pressure pump, i.e. brass cylinder head, stainless steel valves, nickel-chromium plated stainless-steel pistons, help guarantee a long service life and superior running characteristics. A pressure relief valve, integral pressure and water flow controls as well as the steam mode ensure that performance can be ideally matched to different cleaning tasks. The high-performance burner, with upright heater coil and non-detonating continuous ignition, has an infinitely variable setting between 30° and 140°C.
Safety features, such as the low oil cut-out, safety valves, low water cut-out and low heating oil cut-out help protect the machine in tough day-to-day operating conditions. The float tank with its integrated drip-feed scale inhibitor (DGT) reliably isolates the unit from the drinking water main and protects all components that come into contact with water from scale and other deposits. The Servopress system permits infinitely variable control of pressure and water flow directly on the trigger gun. The standard Kärcher Power nozzle delivers outstanding cleaning power for exceptional economy and efficiency. The built-in 30-litre heating oil tank is easily filled and permits long periods of uninterrupted operation.. If required, exact quantities of detergent can be added to the high-pressure jet via the infinitely variable detergent metering valve.

Applications

Features and Benefit

Drive
· Air cooled 9HP-four-stroke petrol engine with electric start..
®Easy to start, robust, high-performance, self-sufficient mobility.
· Automatic reduction of engine speed when gun is closed.
® Reduced noise level and fuel consumption, increased life time.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
Boiler and burnersystem
· High-performance burner, vertical heating coil and permanent ignition, heating capacity: 71kW/61000 kcal.
® Even heat distribution, no corrosion due to condensation, emission values are lower than the statutory values.
Safety and control equipment
· Low water cut out.
® Automatic switch-off of burner when water supply is low,protects against over heating. Miscellaneous
· Sturdy frame from tubular steel, powder coated.
® Overall protection to avoid damage under tough use, easy loading by fork lift truck or crane, corrosion resistant.
· Servopress gun.
® Convenient cleaning without splash back, pressure and water flow adjusted on the gun whilst working.

Go to top Back

HDS 801 E (1.030 - 111)

Standard Equipment

10 m High-pressure hose, Trigger gun with soft grip, Pivoting 1050 mm spray lance, Kärcher 25° Power nozzle, Without plug.

Technical Data

Water flow rate : 300-750 l/h
Operating pressure : 30-150 bar
Max. temp. feed 12°C : 80/45 °C
AVS : yes
Power nozzle : yes
Heater : 24 kW
Connected load : 5,6 + 24 kW
Tank capacity fuel : -
Tank capacity detergent : 1x20 + 1x25 l
Weight : 100 kg
Dimensions length x width x height : 1285 x 690 x 835 mm

Product Description

The HDS 801 E hot water high-pressure cleaner offers a number of very special technical features. Thanks to its emission-free electric heating, this unit is used in all those areas where the use of a burner is not permitted because of its emissions. It is used in hygiene areas of the kind found in food processing companies, hospitals, industrial kitchens, public baths, etc. The high-speed heating chamber and the hot water tank are separate entities for the purpose of rapid hot water production. The high-speed heating chamber has a water capacity of 19 litres and raises its temperature to 60°C within 2.5 minutes (24 kW version).
The heated spray water that is required at any given time flows into the 36-litre hot water tank. Fresh cold water then flows into the chamber. The entire boiler is made of stainless steel. The spray lance and high-pressure hose are pivot-mounted to prevent twisting and ensure fatigue-free operation over long periods of time. The high-pressure pump installed in the HDS 801 E offers superb ruggedness for an extra long service life. The deep-drawn chassis is in one piece without weld seams and virtually corrosion-proof due to its galvanized, phosphated and plastic-coated finish. The detergent tanks (1 x 20 l + 1 x 25 l) are made of corrosion-proof plastics. The mixer on the control panel mixes hot water with cold water from the float tank as required. The consumption of hot water varies accordingly. Holders for accessories and power cable ensure that everything can be kept neatly stowed. A practical compartment is provided for nozzles and other accessories

Applications

The HDS 801 E offers a number of special technical features. The construction of this high-pressure cleaners is a unique compromise between ecology on the one hand and what is technically feasible on the other. Thanks to its emission-free electric heating, this unit is used in all those areas where the use of a burner is not permitted because of its emissions. It is used in hygiene areas of the kind found in food processing companies, hospitals, industrial kitchens, public baths, etc.

Features and Benefit

Drive
· Air cooled 2-pole three-phase motor with thermal protection, endurance tested.
® Strong drive with overload protection, automatic switch-off of machine.
High-pressure pump
· Brass cylinder head with integrated pressure and water flow control, infinitely variable.
® Long service life, detergent application by low pressure.
· Hot-water prove three piston pump (axial), high-grade steel pistons hardended,
swash plate drive.
® Direct drive, minimum of moving parts, outstanding efficiency, smooth and
quiet operation, max. temperature 85°C.
Boiler and burnersystem
· 2 chamber boiler-system, warm-water (36l) and quick on heating chamber (19l).
® The separating of the quick- and warm-water chamber allwos the user to get hot
water in a short time. Hot water which is not required at the moment rises up into
the warm-water chamber and cold water flows into the quick heating chamber.
· Boiler from stainless steel, integrated scale inhibitor with level indicator, heat-up
time (70°C) 24kW machine 2,5 minutes.
® No exhaust gas, hence ideal for closed rooms, protection from scaling,
corrosion prove.
Safety and control equipment
· Temperature control with optical indication.
® Infinetly variable temperature setting, automatic switch-off when the
set temperature is reached.
· Hot an cold water mixing valve on the front panel.
® Mixing of cold and hot water to suit cleaning job, by working with low temperatures
the hot water stock is not worn out-saving energy.
Miscellaneous
· Integrated detergent tank (20/25l), application by high-pressure, infinitely
variable metering valve.
® Possibility to use two different detergents, economical usage of detergent,
accurate metering, metering range: 0-80l/h.

Go to top Back

Machine | Manual Equipments| Dispensers | Cleaning Agents | Special Products I Home